Annular Bit, Tungsten Carbide Tipped, With SDS Plus Mandrel, Ø 68 mm
For installing flush sockets in concrete, brick walls and stone; cutting depth 46 mm
- annular bit tipped with specially soldered heat-resistant carbide plates for drilling holes in concrete, brick walls and stone
- Ø 68 mm, 46 mm cutting depth, for installing flush sockets
- impact and shock resistant for use with hammer drills thanks to specially hardened SDS Plus shank, 110 mm
Product description |
|
This tungsten carbide tipped annular bit including mandrel with specially hardened 110 mm long SDS Plus shank is especially suitable for use with hammer drills. The specially soldered heat-resistant carbide plates are extremely durable and let you drill materials such as concrete, brick walls and stone with ease (e.g. concrete slabs, kerbstones and similar types of hard stone). With a diameter of 68 mm and a possible cutting depth of 46 mm, the annular bit is ideal for installing flush sockets. A centring drill bit (Ø 8 mm) with a length of 70 mm helps you to position your drilled hole exactly. To enable you to get going straight away, the hole saw comes pre-assembled. The annular bit is TÜV-tested, meaning you can be sure of a safe, quality product. |
Suitable for material |
|
Very suitable | Concrete, Breeze block, Brick, Washed-out concrete, Brick walls, Sand lime brick, Pumice stone, Aerated concrete, Breeze block, Floor screed, Clinker, Plaster |
Conditionally suitable | Textile-reinforced concrete, Cobblestone, Flat brick, Marble, Granite, Slate |
Properties |
|
annular bit tipped with specially soldered heat-resistant carbide plates for drilling holes in concrete, brick walls and stone (e.g. concrete slabs, kerbstones and similar types of hard stone) impact and shock resistant thanks to specially hardened SDS Plus shank, 110 mm Ø 68 mm, 46 mm cutting depth – ideal for installing flush sockets includes mandrel and centring drill bit, Ø 8 mm, 70 mm long, pre-assembled for immediate use reliable dust removal by means of 2 discharge holes, stops the annular bit becoming clogged TÜV-tested quality for peace of mind |
Technical data |
|
Working diameter Ø | 68 mm |
Cutting depth | 46 mm |
Drill diameter | 8 mm |
Drill length | 70 mm |
Shank version | SDS-plus shank |
Shaft length | 110 mm |
Threaded connector | M16 |
Cutting edge version | Specially soldered heat-resistant carbide plates |
Additional product specification |
2 discharge holes impact and shock resistant Specially hardened, precise, wear-resistant drill shank |
Direction of rotation | Clockwise rotation |
Instructions |
|
Vor Beginn der Arbeiten unbedingt Spannungsfreiheit herstellen und die länderspezifischen Sicherheitsregeln (z.B. Deutschland: DIN VDE 0105) beachten! |
Scope of delivery |
|
Scope of delivery |
1 hollow annular bit 1 mandrel with centring drill bit |
Select Options